Furnace · Trane
Trane replacement elements
Trane and American Standard are the same manufacturer with different badging, and their components cross over extensively.
Trane element specifications
Typical published ranges for Trane equipment. Always confirm against your own rating plate.
Where to find the data tag on a Trane
Rating plate inside the air handler cabinet. Trane heat kits are separate BAYHTR-prefixed assemblies with their own label, that kit designation is what identifies the correct element.
Common Trane model series
- TAM Series air handlers
- TEM Series air handlers
- Hyperion air handlers
What is specific about Trane
Trane and American Standard are the same manufacturer with different badging, and their components cross over extensively. Trane heat kits carry BAYHTR-prefixed designations as separate assemblies, and that kit number is far more useful for matching than the air handler model alone. Trane air handlers are commonly paired with heat pumps in Ontario, so their strips often serve as auxiliary heat rather than primary.
Also sold as American Standard
These brands share manufacturing platforms with Trane, and elements frequently cross over between them when wattage, voltage and mount match. We verify against your specific model rather than assuming — sharing varies by generation and product line.
How Trane elements typically fail
- Aux-heat strips failing unnoticed until the first genuine cold snap of the season
- Terminal connection degradation from repeated thermal cycling in aux-heat duty
- Single stage opening within a multi-stage kit
Confirm before you order
Test the element before replacing it. A meaningful share of "dead element" calls turn out to be a thermostat, sequencer or limit switch, and the test takes ten minutes with a multimeter. Our resistance test tool tells you what your reading means.
What to send us for a Trane quote
- Model and serial from the rating plate
- Voltage and wattage, if legible
- A photo of the old element, especially the terminal end
- What the equipment is doing — or failing to do
If the plate has faded past reading, our model number guide covers the other places manufacturers record it.
Trane element questions
What is a BAYHTR number?
It is Trane's designation for a heat kit assembly. The kit has its own label separate from the air handler's rating plate, and that BAYHTR designation is the single most useful piece of information for matching your element correctly.
Is American Standard the same as Trane?
Same manufacturer, different badge. Components cross over extensively between the two, so an element matched to a Trane specification will generally suit the equivalent American Standard unit.
My Trane strips only matter in winter. How do I test them off-season?
Switch the thermostat to emergency heat, which runs the strips with the compressor locked out. Better to find a dead strip in October than during a January cold snap, testing in the shoulder season is worth the ten minutes.
Get a quote
Get a Trane element quote
Send the model and serial, or a photo of the rating plate. We confirm the exact fit in writing before anything ships.