Furnace · Goodman

Goodman replacement elements

Goodman, Amana and Daikin share a parent and their heat kits cross over widely.

Goodman element specifications

Typical ranges across the Goodman lines we see most. Always confirm against your own rating plate.

Voltage 208V / 240V
Kit rating 5kW – 20kW
Stages 1 – 4 sequenced
Coil type Nickel-chrome open coil

Where to find the data tag on a Goodman

Rating plate inside the air handler access panel. Goodman heat kits carry HKR or HKA prefixed designations on a separate kit label.

Model series we supply

  • ARUF air handlers
  • AVPTC variable-speed air handlers
  • ASPT air handlers

What is specific about Goodman

Goodman, Amana and Daikin share a parent and their heat kits cross over widely. Goodman kits use HKR and HKA designations, and that kit number identifies the element far more reliably than the air handler model. Goodman equipment is very common in the Ontario residential retrofit market, so these are among the kits we are asked about most.

Also sold as Amana, Daikin

These brands share manufacturing platforms with Goodman, and elements frequently cross over between them when wattage, voltage and mount match. We verify against your specific model rather than assuming — sharing varies by generation and product line.

How Goodman elements typically fail

  • Single stage opening in a multi-stage kit
  • Sequencer failure leaving no strip heat at all
  • Repeat element failure traced to restricted airflow rather than the elements themselves

Confirm before you order

Test the element before replacing it. A meaningful share of "dead element" calls turn out to be a thermostat, sequencer or limit switch, and the test takes ten minutes with a multimeter. Our resistance test tool tells you what your reading means.

What to send us for a Goodman quote

  • Model and serial from the rating plate
  • Voltage and wattage, if legible
  • A photo of the old element, especially the terminal end
  • What the equipment is doing — or failing to do

If the plate has faded past reading, our model number guide covers the other places manufacturers record it.

Goodman element questions

What is an HKR number on a Goodman unit?

It is the heat kit designation, on a label attached to the kit assembly rather than the air handler rating plate. HKR and HKA numbers identify the kit rating and configuration, and are the fastest route to a correct element match.

Are Amana and Daikin heat kits interchangeable with Goodman?

In many cases yes, they share a parent company and kits are common across the three brands. We verify against your specific model and kit number rather than assuming.

My Goodman elements have failed twice in two years. Why?

Repeat failures point at airflow, not part quality. A restricted filter, a crushed return or a weak blower lets heat build around the coil and cooks it. Resolve the airflow restriction or the replacements will fail the same way.

Get a quote

Get a Goodman element quote

Send the model and serial, or a photo of the rating plate. We confirm the exact fit in writing before anything ships.

Send us a photo

Any one of these gets us started. All three and we can usually quote same day.

A clear shot of the rating plate is usually all we need — you do not have to know the part number.

Only if you have it in front of you. Most people don't, and the photo covers it.

ohms

Optional, but it is the one number we cannot work out any other way — it verifies everything else. Not sure how?

Sets the replacement cycle — elements are measured in firings, not months.

We reply within one business day. No obligation, no account needed.

Call (647) 718-1514