Furnace · Arcoaire
Arcoaire replacement elements
Arcoaire is one of the smaller badges in the Carrier corporate family, sharing platform and heat kit hardware with Bryant, Payne, Tempstar, Heil and Comfortmaker, and is somewhat less commonly encountered in the Toronto market than its more visible siblings.
Arcoaire element specifications
Typical ranges across the Arcoaire lines we see most. Always confirm against your own rating plate.
Where to find the data tag on a Arcoaire
Arcoaire air handlers keep the main rating plate inside the front cabinet door, while the heat kit is a separate tray assembly with its own label riveted to the element frame listing kW, voltage and amperage. Always read the tray label for heater specifics rather than the cabinet plate.
Model series we supply
- Performance Series
- AH
- AEA
What is specific about Arcoaire
Arcoaire is one of the smaller badges in the Carrier corporate family, sharing platform and heat kit hardware with Bryant, Payne, Tempstar, Heil and Comfortmaker, and is somewhat less commonly encountered in the Toronto market than its more visible siblings. That relative rarity means Arcoaire-specific documentation and parts can be harder to track down, which is precisely where cross-referencing against a better-documented Carrier-family sibling's specification becomes useful. Sold exclusively through HVAC wholesalers, Arcoaire follows the same sequencer-staged heat kit design as the rest of the industry, with each stage brought online a few seconds apart to manage inrush current. Because the badge is less common, homeowners are more likely to encounter a heat kit with a worn or missing label, making a physical measurement of the element the more reliable path to a match.
Also sold as Arcoaire Heating and Air Conditioning
These brands share manufacturing platforms with Arcoaire, and elements frequently cross over between them when wattage, voltage and mount match. We verify against your specific model rather than assuming — sharing varies by generation and product line.
How Arcoaire elements typically fail
- Burned-open element from restricted airflow, the leading cause of repeat failures across this platform
- Sequencer relay failure resulting in no heat across all stages simultaneously
- Illegible or missing kit labels on older units complicating identification, given the badge's lower overall population
Confirm before you order
Test the element before replacing it. A meaningful share of "dead element" calls turn out to be a thermostat, sequencer or limit switch, and the test takes ten minutes with a multimeter. Our resistance test tool tells you what your reading means.
What to send us for a Arcoaire quote
- Model and serial from the rating plate
- Voltage and wattage, if legible
- A photo of the old element, especially the terminal end
- What the equipment is doing — or failing to do
If the plate has faded past reading, our model number guide covers the other places manufacturers record it.
Arcoaire element questions
I can't find much information about Arcoaire online. Is that normal?
Yes, Arcoaire is one of the less commonly encountered badges within the Carrier corporate family, which also includes Bryant, Payne, Tempstar, Heil and Comfortmaker. Its heat kit hardware is closely related to those better-documented siblings, so cross-referencing specifications against a Carrier-family unit is often the most practical path when Arcoaire-specific documentation is thin.
My Arcoaire heat kit's label is worn away. How do I identify the element?
Measure the element's physical length, terminal spacing and coil gauge directly, and if possible test its resistance with a multimeter to back-calculate the wattage at your supply voltage. A manufacturer that winds to specification can match those physical and electrical figures without needing a legible factory label.
Why did my Arcoaire air handler stop producing any heat at all?
A total loss of heat across every stage points to the sequencer or control board rather than the elements themselves, since it would be unusual for every element to fail simultaneously. Check the sequencer coil for continuity and confirm the control board is sending a call for heat before inspecting individual elements.
Get a quote
Get a Arcoaire element quote
Send the model and serial, or a photo of the rating plate. We confirm the exact fit in writing before anything ships.